Chockfast Red SG

Techmar_Products_Chockfast Red SG

CHOCKFAST® RED SG is a three component, high strength, 100% solids epoxy grouting compound which is used to grout large machinery and to support soleplates in all types of foundation designs with clearances as little as 1" (25mm).

CHOCKFAST® RED SG has extremely high physical properties and negligible shrinkage, making it ideal for final positioning of critically aligned equipment within close tolerances. Skid mounted compressors, extruders, turbines, pumps, motors and crane rails are just a few types of equipment supported on CHOCKFAST® RED SG. When using CHOCKFAST® RED SG for crane rail applications expansion joints may be placed every 10' (3m).

Use and Benefits
CHOCKFAST® RED SG has the following advantages when compared to conventional cementitious
grouts:

  • Impervious to oil and chemical attack
  • Cures at least three times as quickly
  • Pre-packaged unit
  • Grout machinery in final aligned position
  • Higher physical strengths
  • Strong bond to metal and concrete
  • Unaffected by weathering and freeze/thaw cycling
  • Superior resistance to fatigue

CHOCKFAST® RED SG contains no non-reactive diluents which could interfere with the curing mechanism or which could cause material loss during or after cure. Machinery may be positioned at its final elevation before pouring because the shrinkage is negligible. Critical alignments are maintained during machinery operation due to CHOCKFAST® RED SG's high dimensional stability and resistance to creep and vibration.


Safety & Technical Data Sheets

Click one of the buttons below to open the data sheet.